Machine performance
The machine is composed of paper feeding, printing and die-cutting, which can complete the printing, pressing,slotting, Angle cutting and drilling of 3-layer and 5-layer corrugated board at one time.
The transmission system all adopts the big helical Angle helical gear transmission, the noise is low, enhances the strength of the gear, improves the transmission stability of the gear. All transmission gears are made of 20CrMnTi alloy steel, with fine grinding, super hard treatment and enclosed spray lubrication, ensuring the transmission accuracy of the machine for a long time.
Each unit is electrically operated on clutch and equipped with an alarm, which continuously rings during clutch to ensure the safety of operators.The clutch motor is equipped with constant torque clutch, which can buffer the collision of each unit in case of wrong operation.
After each unit is closed, each group is pneumatically locked and equipped with a general locking device, which can make each unit and the bottom rail lock integrated.If the cylinder is not locked, the main motor cannot start running;The locking cylinder cannot be opened while the main motor is running.After the separation of each unit, the transmission system will brake automatically and keep the original position of the gear fixed.
Each unit has an automatic zero setting system, and a small amount of cardboard can be adjusted to the correct size to reduce cardboard waste.
The machine is beautiful in shape and soft in color.Modular design allows you to add or subtract units at will.
Bearings with NSK, Harbin, Wanxiang and other famous domestic manufacturers production of brand-name bearings.
The main motor adopts frequency conversion motor.
Contactor, relay button, etc. are used in the domestic famous brands of Chint, Schneider low voltage electrical appliances.
Pneumatic parts: the cylinder adopts zhejiang "Dongte" famous brand cylinder, the solenoid valve adopts Shanghai "Sonuo" or Guangzhou "Yadecke" famous brand products.
The machine adopts key-free connection to ensure the connection precision and reliability.
This machine feed paper, printing, die-cutting parts processing technology.
1) Side wall panel casting - manual aging treatment - rough planing - fine planing - overall precision machining of large processing center - quality inspection - storage. 2) Gear: forging -- rough turning -- quenching and tempering -- fine turning -- hobbing processing -- heat treatment -- fine grinding of inner hole and plane -- grinding of high-precision gear grinding machine -- detection by special gear detector -- quality inspection -- storage. 3) Shaft: Rough car hair blank tube inner hole (welding shaft head) -- welding the first shaft disc -- rough car outer circle -- static balance -- welding the second shaft disc -- annealing treatment -- fine car -- dynamic balance -- rough grinding -- fine grinding -- hard chrome plating -- quality inspection -- storageComputer control operations
The paper feeding section adopts PLC human-machine interface control.
Controlled anilox roll rise and fall: when a group of temporary does not need to print, the controlled production of this group of anilox rolls do not need to fall, so that there is no need to clean the ink roll.
Position zero: the machine can be plate position zero, so that the plate position can be in place.
Main parameter
Model | 2500mm |
Machine inside width |
2500mm |
Maximum production speed |
300pcs/min |
Economic rate of production |
220pcs/min |
Maximum feed paper size |
2300x900mm |
Minimum feed paper size |
600x300mm |
Skip feed paper size |
2300x1100mm |
Maximum area of printing |
2200x900(hung plate) |
Standard printing plate thickness |
4-7.2mm |
Tinted precision |
≤±0.5mm |
Maximum area of die cutting |
2200x900mm |
Main motor power |
15kw |
Total power |
53kw |
Glue part
1. Connection with printing department, printing, die-cutting, gluing, folding, calibration, counting, stacking, packing, output.
2. The production line maximum speed of 300m/min.
3. The whole machine is connected to control, the computer stores the order, the remote control operation, the display screen digital input, the big arm opens and closes automatically.
4. Key Drive purchase import brand bearing, high speed drive belt.
5. Gelatinize department: adopt stainless steel gelatinize wheel, corrosion-resistant, even gelatinize.
6. Electrical appliances: all adopt international top brands, stable quality and reliable.
Model | 2200 |
Size A(mm) |
80-660 |
Size B(mm) | 470-2200 |
Size C(mm) | 130-660 |
Size D(mm) | 170-900mm |
Installation area(mm) |
10*3m |
Motor power |
15kw |
Weight |
6-7T |
Full automatic online packer machine
1. Automatic bundle machine series of products running fast, product stability in the industry leading position.
2. Size exchange full computer adjustment, menu storage machine automation, automation is the highest in the industry.
3. Delta PLC controller, data change, machine operation are all controlled by touch screen, convenient and fast.
4. Before strapping, the cartons are automatically arranged in five directions, and the strapping products are neat and beautiful.
5. The automatic alignment function before strapping is convenient for docking all kinds of front models, and the compatibility of front models is stronger.
Technical parameters
Model | 100125 taobao series | |
Package size A | 210-1100mm | |
Package size B | 170-1000mm | |
Package size C | 80-270mm | |
Package size D | 165-520mm | |
Processing power | 15±2 package/min(A=230mm,B=190mm) | |
Size change | Touch screen setting are automatic adjusted | |
Usd of packing material | PE belt (28# 35#) note: 28# standard belt | |
Overall dimensions |
3100(L)x2500(W)x2000(H) Equipment height based on rail height increase or decrease |
|
Work air pressure |
0.4-0.6Mpa |
|
Work voltage |
3 phase |
|
Total power |
3kw, running power 2kw |